• Twitter
  • Faceboook
  • Youtube
  • Email
  • Google Plus
Search sponsored by EastOregonMarketplace.com

Nelson Irrigation is pleased TO INTRODUCE the revolutionary r55a end of pivot sprinkler

Print Print

Nelson Irrigation continues to take its proprietary Rotator® technology to new levels. The R55A End of Pivot Sprinkler is changing the way farmers irrigate with center pivots. It can be used to pick up added acreage both throughout the full revolution of the pivot or just in the corners, depending on site specifics and irrigator preferences. It can be used in conjunction with a higher volume Big Gun® sprinkler – or on its own. The R55A is to be mounted in an upright position at the end of the overhang. It can always remain on, turn on via a solenoid on an 800 series valve or work under the logic of a linked control system with a SR100/800P Valve or SRNV100 (Nozzle Valve). (Please contact the factory for specific mounting configurations and logic drawings).  This part-circle, multi-stream sprinkler operates under the same principles of other Rotator® sprinklers. The R55A has a braking mechanism that controls the rotation of the sprinkler plate. The highly engineered plate geometry turns the water flow into multiple streams.  Optimized, wind-fighting droplets project out far, while gentler droplets fall in near – filling in the water pattern. Water hitting the plate drives the rotation while the rotator brake maintains a uniform speed. Possibilities abound as irrigators around the world see this new end of system advancement. 
 
Performance is 40-50' (12-15 m) @ 15-30 PSI (1.0-2.1 bar). Typical added acreage on a ¼ mile pivot is 6-8 acres (2.4-3.2 ha) irrigating full circle and 5-6 acres (2.0-2.4 ha) corners only.
 
Nelson Irrigation Corporation (NIC), headquartered in Walla Walla, Washington U.S.A., plans, designs, manufactures and sells proprietary products for the irrigation equipment market. The mission statement has remained the same for 40+  years - save water, save energy and do a better job of irrigating. 2011 marked 100 years of manufacturing irrigation equipment for the Nelson family – with L.R. Nelson's introduction of the “clincher” hose coupler in 1911.



Print Print

User Comments

blog comments powered by Disqus